Mike's Reloading Bench
I have had many stock turrets come through my shop for modification and frankly none of them have been what I would call great. They are porous and the machine work leaves much to be desired, especially the threaded holes for the dies. I have also had some that regardless of what I did I could not get them to align radially with the shellplate even though they showed no signs of incorrect machining according to Lee's criteria as regards quality control. This is what has led me to having precision machined turrets made. They are not simply "billet bling" for your press. They are a MAJOR step forward in helping you produce quality ammunition.
These CNC precision machined turrets are made in the USA from 6061-T6 aluminum bar stock. They are produced on state of the art Haas and Mori Seiki CNC machining centers to exacting tolerances and are a direct replacement for the stock Lee turret. Unlike a casting, these machined turrets start life as a solid disc of aluminum free from any impurities or porosity. Every hole is precisely located in relation to one another and to the turret lock screw to insure exact alignment of the dies with the shellplate in all respects. The five 7/8-14 threaded holes are milled using a precision thread milling cutter instead of being tapped with a conventional tap. This results in finished threads that can be held to very close tolerances insuring exact positioning of the dies. Also included are five equally spaced 1/4-20 tapped holes fitted with 1-1/4" long set screws to be used as positive stops for the shellplate to eliminate any flexing or tilting of the shellplate due to uneven loading. This is a major step forward in maintaining very close COAL measurements without the need for a "dead length" seating die. Also incorporated into the turret is a 1.050" diameter by 0.250" deep counter-bore designed to accept a small LED flashlight to provide additional lighting if desired. The center hole in the turret is 0.825" in diameter which allows for maximum light transmission onto the shellplate area. Every surface on the turret is fully machined to provide a perfect fit in your press.
If you are dealing with tilted dies, alignment problems between the cartridge cases and the dies and wandering COAL measurements these turrets will bring a whole new level of precision to your Load Master press.
Mike's Reloading Bench is not afilliated with Lee Precision.
More coming so stop back often.
Custom Billet Turret
Custom Billet Turrets are $60.00 each plus shipping.
USA and Canada only.
Your sorce for custom parts and accessories for the Lee Load Master